KASTOtec Serisi Testere Tezgahları
The KASTOtec AC was developed for the optimal use of the bi-metal, bi-metal plus, carbide and carbide plus tool technologies offered on the market. In this way, optimal productivity is achieved with a higher cutting performance and a more economic use of carbide bands. The control system used in the machine enables the automatic assignment and lasting storage of the cutting technology adapted to the respective material qualities and the saw band used (bi-metal or carbide). This doesn‘t just lower tool costs, it is also results in significantly shorter cutting times - depending on the saw band, savings of 50 per cent and more are possible. The simple operation and the well-designed material handling reduce downtimes and thus create the best conditions for optimum economic efficiency.
| Machine Model | Cutting range (mm) | Cutting range (H x W) (mm) |
Material feed length, single stroke (mm) |
Minimum section length mm | Minimum offcut length in automatic operation |
| KASTOtec AC 4 | 430 | 430 x 430 | 600 | 10 | 35 |
| KASTOtec AC 5 | 530 | 530 x 630 | 600 | 6 | 35 |
| KASTOtec AC 8 | 830 | 830 x 830 | 750 | 8 | 50 |
| KASTOtec AC 8×10 | 270 x 830 | 830 x 270 – 1.100 | 750 | 8 | 50 |
Advantages of the KASTOtec AC series machines:
- Saw blade guide using hydraulically preloaded carbide sliding guides
- Electronic monitoring of the hydraulic saw band tension
- Continuously adjustable cutting speed, centrally adjustable
- Optimal saw band service life thanks to the patented belt-free stroke when lifting the saw frame
- 0 – degree start point for fully automatic positioning of the first cut
- Controlled saw feed movement using two ball screw spindles
- Optimal cleaning of the saw band by electric, motor-driven, self-adjusting chip-removal brushes
- Fast movement from servo drives and ball screw spindles for material feed and linear-guided saw frame
- Band guide arm automatically adjusts to the width of the material
- The saw machine control system ProControl is easy to operate and takes care of the crucial settings.
- Easy input of sawing orders with section lengths, quantities and material selection.
- Effective use of material up to a 35 mm short offcut
- New layout: Drive unit and sensors are separated from the actual work area – ensuring reliable and
- trouble-free operation
- Material clamping jacks with free-lift device ensure reliable automatic operation
- High cutting performance with impressive repeat accuracy
- Good accessibility despite compliance with current safety standards
- 50 % savings on wear and tear costs compared with predecessor machines