RAS 20.10-12 Duct Zipper V Ducting Machine
RAS has designed the DuctZipper in L-shape especially for large ducts and high productivity. The RAS DuctZipper duct seaming machines reduce the traditional three steps (rollform the receiver lock, rollforming the flange and finally closing the seam) down to only one easy run through the machine. The result is a clean joint and an extremely tight duct.
| Technical Data | RAS 20.12 | RAS 20.10 |
| Material thickness max. | 1.0-1.25 mm | 0.5-1.0 mm |
| Min duct dimensions | 140×140 mm | 100×100 mm |
| Speed | 15 m/min | 15 m/min |
DuctZipper-V Highlights
- Quick and easy forming and closing of long seams on air ducts
- Cost-saving production, as a single pass replaces 2-3 operation steps
- Ideal machine for small and medium sized air ducts
- Very tight seam joint for demanding applications
- AutoPilot ensures a simultaneous start of the seam on both ends
- The duct support system holds the weight of the duct
- If there are several seams the support system becomes a transport system
- Convenient, power-saving and usually saves the second operator
- Improved seam quality due to extended guiding rail